6 AWG 19-Stranded THHN Green Copper Building Wire (150FT Cut)

Applications:Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). 6 AWG THHN-THWN-2 is permitted for new construction or rewiring for 600-volt applications. Applications requiring Type THHN or THWN-2, the conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90°C or not to exceed 75°C in oil or coolants. Applications requiring Type AWM conductor is appropriate for use in dry locations at 90°C, or not to exceed 60°C in wet locations or where exposed to oils or coolants. Applications requiring Type AWM conductor is appropriate for use at temperatures to not exceed 105°C in dry locations. Most common building wire used often on sub-panels, hot tubs & jacuzzis.Also Known As:Copper wire, THWN-2 Wire, building wire, hook up wire, conduit wire, hot tub wire, lighting wire, nylon copper wire, construction cable, 6 gauge wireFeaturesNylon outer jacket for easy pulling. VW-1 rated 14 AWG - 6 AWG. All sizes are rated gasoline and oil-resistant II.Jacket:A tough, polyamide, Nylon outer covering per UL-1063 and UL-83.Standards:Underwriters Laboratories Standards UL-83, UL-1063, UL-758AWM Spec 1316, 1317, 1318, 1319, 1320, 1321ASTM Stranding Class B3, B8, B787Federal Specification A-A-59544NEMA WC70/ICEA S-95-658Institute of Electrical and Electronics EngineersConstrction:Insulation:Color-coded Polyvinyl Chloride (PVC), heat and moisture-resistant, flame-retardant compound per UL-1063 and UL-8Specifications:Size:6 AWGNumber of Strands:19PVC Insulation Thickness (Conductor):0.760 mm / 0.030 inchesNylon Jacket Thickness:0.130 mm / 0.005 inchesOutside Diameter:6.30 mm / 0.248 inchesWeight per Foot: 0.109 lbsAllowable Ampacity:55 Amps at 60℃ / 65 Amps at 75

• #6 AWG Commercial Wiring for Outlets, Switches and Other Loads
• Contains Copper (Cu) Conductors Made with Annealed (Soft), Compressed Copper
• Can be Used in Wet or Dry Locations. Insulation is High Heat and Moisture Resistant Polyvinyl Chloride (PVC). Jacket is Abrasion, Moisture, Gasoline, and Oil Resistant Nylon
• Has an Allowable Ampacity of: 55 Amps at 60 Degrees Celsius, 65Amps at 75 Degrees Celsius, and 75 Amps at 90 degrees Celsius
• Rated for 600-Volts with a Heat Capacity of up to 60 Degrees Celsius in Wet Locations and 105 Degrees Celcius in Dry Locations.