Abrasive Aggregate Spreader Machine Commercial Hand-Push Spreader with Uniform Distribution for Concrete Floor/Floor Construction 2.2-13.2lbs/m² (1-6kg/m²)

Product Parameters:Material:SteelSpreading thickness:2.2-13.2lbs/m² (1-6kg/m²)Tire material:Wide vacuum tiresPrecautions:1. The optimal spreading time is during the initial setting stage of concrete, when the surface begins to whiten and foot impressions sink approximately 5mm. Applying too early may cause the material to sink into the concrete and lose effectiveness, while applying too late will affect bonding strength.2. The first spreading amount should be 2/3 of the total quantity, evenly covering the concrete surface while avoiding throwing to prevent material segregation. Corner areas require priority treatment to prevent rapid moisture loss from affecting performance.

• [Uniform Material Distribution] The mechanical system ensures an even spread of emery or other aggregates over the concrete surface, preventing uneven distribution caused by manual spreading, thereby guaranteeing the floor's wear resistance and aesthetic quality.
• [Improved Construction Efficiency] Compared to manual spreading, this equipment significantly increases construction speed, reduces labor intensity, and minimizes environmental pollution.
• [Adaptability to Various Scenarios] Suitable for locations requiring high ground wear resistance, such as warehouses, workshops, and parking lots. The spreading direction can be adjusted left or right, ensuring flexible operation.
• [Large-Capacity Hopper] The hand-pushed abrasive aggregates spreader is primarily used to evenly distribute fine aggregate materials such as silicon carbide on concrete surfaces, commonly employed in floor construction. Large-Capacity Hopper with Reinforced Legs - Supports up to 300 kg for heavy-duty material handling.
• [Filter Screen for Emery] Used to sift abrasive aggregates, preventing clump formation during material processing.