Digital Force Gauge Push and Pull Tester Dynamometer Thrust Meter with Digital Hand Dynamometers 65 lbs Capacity 300N Max Load, White

Feature This product SF Push-pull Dynamometer is a simple push pull force gauge with high performance. Specification 1.Digital display,easy reading; 2.In light weight,small size,easy to carry; 3.Unit display:Lb,Kg,N 4.The battery has over-load protection in case of short circuit and leakage of electricity .It also can tell you when the battery is running low.It adopt the 3.7V lithium battery and auto shut off with no operation in 10 minutes at the same time. Main technical parameters Model:SF-300 The max. Load value:300N 30kg 65Lb Load Value:0.1N 0.01KG 0.01Lb The sensor:Sensor inside Precision:±0.5% Power:3.7V lithium battery Charging time:4~6 hours Continuous usage time of battery:About 15 hours Battery life:≥ 300 times Charger :Input：AC100- 240V 50-60Hz Output： DC 5V 1000mA Working temperature:5 ℃ ~35 ℃ Transportation temperature:-10 ℃~60℃ Relative humidity:15%~80%RH Work environment:No focus ,Non-corrosive in surroundings

• Max Load:300N
• 1.Peak mode: After turn on,enter into the measuring interface,click “SET” button can enter into the peak mode directly,record the Max. force value during measuring.
• Warranty: 1 year
• 2.Push pull force shows:do not move the gauge,the above arrow shows the pull force,the below arrow shows the push force.
• 3.Three units:N(newton),kg(kilogram),lb(pound) display respectively ,press “UNIT” button to switch .