Intelligent LCD Paint Coating Surface Scratch Tester Coating Scratch Paint Film Scratch Tester 20-40mm/s, 50-2000 Load for Film Hardness Testing 110V

Product Parameters Voltage: AC110V Power: 100W Testing standards: ISO 1518, BS 3900, EN 61558, GB 4943, GB 4760.1, IEC 60335, ASTM D5178, ASTM D2197 Stroke length: Not less than 60mm Moving speed of test bench: 20-40mm/s(settable) Scratching needle tip steel ball: 1mm Tilt angle of the lower face of the top bar: 10-15° Minimum increment: 1.76oz(50g) Moving distance: 0-65mm(settable) Weight loading range: 0~2000g(50g/2, 100g/2, 200g/1, 500g/3) Package size: 27.2"*16.9"*17.3" (69cm*43cm*44cm) Net weight / Gross weight: 41.4lbs(18.8kg) / 74.9lbs(34kg)

• Film strength, hardness, adhesion, etc., are crucial physical properties of a coating. Their magnitude directly affects key performance characteristics of the film, as well as the film's retention capability and ease of cleaning. Therefore, film strength, hardness, and related properties are essential test indicators for evaluating coating performance.
• This instrument complies with the following test standards: ISO 1518, BS 3900, EN 61558, GB 4943, GB 4760.1, IEC 60335, ASTM D5178, ASTM D2197.
• Control Panel. The control panel features a high-quality LCD touch screen, allowing direct parameter setup and device operation for testing. With its simple layout and user-friendly design, it enhances testing efficiency and delivers more accurate results.
• Non-slip Suction Cup. The machine is equipped with eight calibrated dead weights ranging from 50g to 500g, enabling test loads from 0 to 2000g. By adding/removing weights, it accurately simulates various loading conditions to ensure precise test results
• Counter Weight. Core Functions of the Counter weight:Dynamic balance compensation – Eliminates jerking during test start/stop cycles;Stabilized vertical force – Complies with ASTM D2197 Section 5.3 requirements;Vibration suppression – Absorbs >80% of drive motor oscillations via mass damping effect, preventing scratch path irregularities.